drywall contractor
Seamless Walls. Flawless Finish.
Texas Prime Homes is the Rio Grande Valley's trusted drywall contractor — delivering precision installations for residential and commercial projects across the RGV. From new construction sheetrock to seamless texture matching on repairs, our drywall contractor team produces walls that are perfectly ready for paint — every time.
Our Drywall Services
From new construction to storm damage repairs, Texas Prime Homes is the drywall contractor RGV homeowners and businesses trust — delivering every scope with the same commitment to precision and quality.
Sheetrock Installation
New construction and remodel drywall hanging for residential and commercial projects. We hang, measure, and cut with precision — tight seams, proper fastener patterns, and correct board orientation for every application.
Seamless Taping & Floating
The difference between a good drywall job and a great one is in the tape and float. Our finishers apply multiple coats of joint compound, feathering each coat to create invisible seams that disappear under paint.
Texture Application
Orange peel, knockdown, skip trowel, smooth finish, and custom textures matched to your existing walls. We replicate any texture pattern with precision — critical for repairs that need to blend seamlessly.
Drywall Repair & Patching
Holes, cracks, water damage, and impact damage repaired and finished to match your existing wall texture. From a nail hole to a 4-foot section, our patches are invisible after painting.
Water Damage Restoration
Drywall damaged by roof leaks, plumbing failures, or flooding must be fully replaced — not just dried. We remove all compromised material, treat for mold, and install new drywall with a finish that matches your existing walls.
Structural Wall Repairs
Cracks caused by foundation movement, settling, or structural shifts require more than cosmetic patching. We assess the underlying cause, stabilize the structure if needed, and deliver a lasting repair.
Our Drywall Installation Process
A flawless wall finish is the result of a disciplined, multi-step process. Here is how Texas Prime Homes — your licensed drywall contractor in Edinburg — delivers walls that are perfectly ready for your painter.
Assessment & Scope
We inspect the work area, identify all damaged or incomplete drywall, and provide a written scope covering materials, labor, and finish level. No vague estimates — you know exactly what you are getting.
Framing & Blocking
For new installations, we verify framing is plumb, level, and properly blocked for drywall attachment. Correct framing is the foundation of a flat, crack-free finished wall.
Board Hanging
We hang drywall with proper fastener spacing, staggered seams, and correct board orientation. Ceiling boards are hung perpendicular to joists. Every board is measured and cut precisely before installation.
Taping & First Coat
Paper tape is embedded in the first coat of joint compound over all seams and fasteners. Corner bead is installed on all outside corners. The first coat is allowed to dry completely before the next step.
Second & Third Coats
Each subsequent coat is applied wider and thinner, feathering the compound to create a smooth, invisible transition. Three coats are standard for a Level 5 finish — the highest quality available.
Sanding, Texture & Prime
After the final coat dries, we sand all surfaces smooth, apply your chosen texture, and apply a drywall primer coat. The result is a wall surface that is perfectly ready for your painter.
The Texas Prime Homes Drywall Contractor Difference
Invisible Repairs
Our texture matching is so precise that repaired sections are indistinguishable from original walls after painting. We do not leave visible patches.
No Shortcuts on Coats
Three coats of joint compound is the standard for a quality finish. We never rush the drying process or skip coats to save time.
Mold-Safe Practices
All water-damaged drywall is fully removed and the underlying structure is treated before new board is installed. We never cover mold.
Painter-Ready Delivery
We deliver walls that are sanded, primed, and ready for your painter — no additional prep work required on their end.
Drywall FAQs
What drywall finish level do I need?
Level 3 is standard for walls receiving heavy texture. Level 4 is recommended for flat or light texture finishes. Level 5 — a skim coat over the entire surface — is required for gloss or semi-gloss paint and critical areas like master bedrooms and formal living rooms. Texas Prime Homes delivers Level 4 as standard and Level 5 on request.
Can you match my existing wall texture?
Yes. Texture matching is one of our most requested services. We analyze your existing texture pattern and replicate it precisely — whether it is orange peel, knockdown, skip trowel, or a custom pattern. Patches become invisible after painting.
How long does drywall installation take?
A typical room takes 1–2 days to hang and 3–5 days to tape, float, and finish (allowing drying time between coats). Whole-home projects are scheduled in phases. We provide a detailed timeline in your written proposal.
Do I need to worry about mold when replacing water-damaged drywall?
Yes — and Texas Prime Homes takes it seriously. We remove all water-damaged drywall, inspect the framing and insulation behind it, and treat any mold-affected surfaces with antimicrobial solution before installing new drywall. Covering mold with new drywall is never acceptable.
Need a Drywall Contractor in the RGV?
Call Texas Prime Homes — your trusted drywall contractor in Edinburg and the Rio Grande Valley — for a free written estimate. We serve McAllen, Pharr, Mission, Harlingen, Brownsville, and the entire RGV.